t shirt conveyor dryer

2.5м Дужина Сушилица транспортних трака за сито штампање

Description

Након што смо штампали мајице, потребно га је осушити. Мастило је течност и течно је док се не осуши. Природне методе сушења су спорије. За штампарску индустрију, обично користимо транспортна сушилица мајица. У масовној производњи, сушара за транспорт сита може брзо испећи одећу. Тако увелико побољшава ефикасност производње.

Ситотисак са сушачем на транспортној траци је врста тунелске пећи. Машина за сушење веша с мрежом укључује мрежасти тракасти транспортер и пећ за грејање. Не може само да делује као транспортна сушилица мајица, али и за сушење других производа за сито штампу. На пример, we usually use this infrared mesh belt dryer to dry glass and plastic.

 

Да ли вам је потребна сита за сушење за сито штампу?

Ако производе за сито штампање печете у пећници за сушење веша, доћи ће до следећих проблема:

Прво, мали капацитет. Узмите као пример стаклену плочу. Са пећницом се може ставити 6 слојеве, сваки слој од 22 комада. Температура сушења треба да достигне 180 степени. Минимално време загревања је 35 минута. 8 сати непрекидног рада могу само да испеку 1716 комада производа.

Друго, радно оптерећење је велико. Оператер мора напунити слој и ставити га у пећ за сушење. После печења, мора се редом извадити. Ове радње је потребно поновити. Т

Трећа је висока температура производа након сушења. Оператер има могућност опекотина. Зато је опасније.

У циљу превазилажења ових недостатака, потребно му је сито штампање на машини за сушење са покретне траке.

 

How does T-shirts conveyor dryer work?

By setting up a mesh belt conveyor in the oven, it can make the screen printed products dry automatically. When use t shirt conveyor dryer, place the screen-printed products on the conveyor line. Мрежасти ремен ће транспортовати производе до сушаре сита за печење. Издувни гасови из процеса сушења испуштају се кроз излаз за издувне гасове. Коначно, осушени производ се преко мрежасте траке премешта у излазну зону.

This conveyor belt dryer screen printing uses the infrared heating lamp. Додатно, the wind impeller can make the heat air to spread quickly throughout the oven. The temperature in the screen conveyor dryer is even. Осим тога, the thermostat can precisely control the temperature of t-shirts conveyor dryer. Тако, this will ensure baking quality.

 

Technical specification of this conveyor belt dryer screen printing

 

Назив производа транспортна сушилица мајица
Power of mesh belt dryer 7200В
Screen conveyor dryer length 2500мм
Oven heating zone 150x65cm (belt width 65cm)
Baking temperature 0~250 ℃
Belt conveying speed 1~5 meters / min (подесиви)
Грејач Infrared lamps
Апликација This continuous belt dryer has wide application in printing, electroplating, heat shrink packaging and electronics industry, итд

Љубазна напомена: we can customize the conveyor belt dryer screen printing as customersspecific sizes & захтеви.

 

 

Characteristics of infrared screen conveyor dryer

1. Tunnel dryer screen printing adopts hot air circulation method (convection heating). The temperature inside the oven is uniform. Осим тога, it heats up quickly.

2. The conveyor belt dryer screen printing is with a thermostat. So customer can adjust the temperature freely. Према томе, it can adapt to the baking of different screen printing products.

3. The mesh belt conveyor is equipped with inverter. So you can adjust the running rate according to the actual needs. Коначно, it can control the drying time.

4. The tunnel t shirt conveyor dryer oven is filled with insulation cotton, which can effectively reduce heat dissipation.

5. This screen conveyor dryer is with adjustable end shield. Not only easy to feed and discharge, but also can block the diffusion of heat and ink vapor. So it can reduce the harm of ink vapor to human body.

 

How to operate the t shirt conveyor dryer rightly?

Before operating screen conveyor dryer, pls check the following items:

1. check whether flammable and explosive materials are above and near the conveyor belt dryer screen printing;

2. check whether the wind impeller is operating normally.

3. and check if the dryer mesh belt is running normally.

4. if it is a new conveyor dryer, it is best to test it firstly. This determines the best drying temperature and time.

 

Use the tunnel dryer screen printing:

After confirming that there is no abnormality in the drying oven, turn on the power switch. Then operate the control cabinet.

Следећи, turn on the start general switch — conveyor switch — heating switch — wind motor switch in turn.

After the conveyor furnace heating normally, operators should immediately check the air motor switch for abnormalities.

Set the mesh belt dryer temperature according to the product requirements. Истовремено, set the belt conveyor speed.

Operators should frequently inspect the working condition of screen conveyor dryer.

Remember not to put your hand on the chain or gear part when the t shirt conveyor dryer is running.

 

Љубазна напомена:

Check the heat tubes of conveyor belt dryer screen printing daily to make sure it is normal.

Додатно, every 2 days, use the thermometer to test whether the temperature is normal.

Take care to keep the screen t shirt conveyor dryer clean.

Reviews

There are no reviews yet.

Be the first to review “2.5м Дужина Сушилица транспортних трака за сито штампање”

Ваша емаил адреса неће бити објављена. Обавезна поља су означена *

    Пошаљи поруку